Why do we need a Chinese Truck Clutch?

       The friction plate on the Chinese Truck Clutch and the flywheel are in a state of sliding friction. The speed of the flywheel is greater than the speed of the output shaft, and the power transmitted from the flywheel is partially transferred to the gearbox. At this point the engine is in a soft connection with the drive wheels.

• What parts need to be included in a daily inspection of a Chinese Truck Clutch?

• Why do we need a Chinese Truck Clutch?

• What is the commissioning method of the Chinese Truck Clutch?

What parts need to be included in a daily inspection of a Chinese Truck Clutch?

If you have a hydraulic clutch release mechanism, check for

• Air in the hydraulic system

• Insufficient fluid in the reservoir

• Hose or pipe leaks

• Leaky connections

• Master cylinder, center valve seal failure

• Master cylinder, piston main seal leakage

Why do we need a Chinese Truck Clutch?

       Your car needs a Chinese Truck Clutch because the engine keeps spinning, but your wheels don't. To stop the car without stopping the engine, you need a way to separate the wheels from the engine. By friction between the engine flywheel and the clutch disc, you engage the spinning engine to the sometimes spinning transmission and vice versa.

       When you do not engage the clutch, you may experience clutch pressure plate failure symptoms. The clutch spring pushes the pressure plate against the Chinese Truck Clutch which presses against the flywheel and locks the engine to the transmission input shaft, causing both to spin at the same speed.

What is the commissioning method of the Chinese Truck Clutch?

       Method 1, adjust the push rod of the Chinese Truck Clutch, on the side of the transmission, the method is very simple, first loosen the fixed nut of the rod, and then rotate the push rod (after the fixed nut is loosened, the push rod is movable and can be rotated clockwise and counterclockwise), see the rod become longer and shorter, to press the rod back towards the pressure plate, think there is a gap, if not, shorten the push rod. (Sometimes if method 2 is not adjusted, you can only adjust the assistant, generally the larger the gap the lower the clutch, the smaller the gap the higher the clutch)

       Method 2, adjust Chinese Truck Clutch's master pump, under the clutch pedal, when using method 1 to adjust the appropriate, test the car feel too high or too low, you can first look at the master pump has no adjustment, the same reasoning master pump is also a push rod, on the pedal under the low, also has the same fixed nut, as long as the loosening can shrink the rod longer or shorter, the master pump is generally loose long clutch It will be high.

In future, Jinan chuangjin international trade co., Ltd will continue exploring domestic and oversea markets simultaneously and aiming to become first class, world renowned clutch manufacturer.