Publish Time: 2023-06-23 Origin: Site
The clutch plate is a sensitive part in the drive system of the motor vehicle (cars, motorcycles and other vehicles with mechanical transmission equipment, etc.). When using it, special attention should be paid to the operation of the engine and the feet should not be on the clutch pedal all the time.
What is a clutch plate?
Do the clutch plates need to be replaced?
How do I replace the clutch plate?
(1) clutch plate is a composite material with friction as its main function and structural performance requirements. Automotive friction materials are mainly used to produce brake friction discs and clutch plates. These friction materials mainly use asbestos-based friction materials. With the increasing requirements of environmental protection and safety, semi-metal friction materials, composite fiber friction materials and ceramic fiber friction materials have gradually appeared.
(2) Since the friction material is mainly used to make the parts of the braking system and transmission system in automobiles, it must have a sufficiently high and stable friction coefficient and good wear resistance.
The clutch is an indispensable part for a car with manual transmission. As soon as the clutch has a problem, it must be replaced in time. So how to judge whether the clutch plate needs to be replaced?
1. if the car is in first gear when the driver puts his foot on the brake or applies the handbrake, when the clutch is released and ready to start, if the car does not suddenly shut down at this time, it means that this is the case The clutch plate must be replaced in time. This is because if the driver releases the clutch too quickly under normal circumstances, it will cause the engine to stall. If the engine does not stop at this time, it indicates that the clutch plate has poor contact and needs to be replaced.
2. if the driver notices that the height of the clutch pedal is getting higher and higher, the clutch plate must be replaced in time, otherwise the wear of the clutch plate will be more and more.
3. if the car can not accelerate when climbing, there is a high probability that the clutch plate is a little worn, which must be replaced in time.
1 To replace the clutch plate, park the car in a safe position and open the hood.
2 Remove the inside of the engine and take it out to see the clutch plate.
3 After taking out the engine, remove the clutch cover next to it, and then you can see the clutch plate.
4 You need to remove the 5 screws in the middle to take out the flywheel.
After 5, the old clutch plate can be removed.
6 After finding a suitable model, replace the new clutch plate and install it.
7 If the roller is badly worn, the roller can be replaced at the same time.
Jinan Chuangjin International Trade Co, Ltd is an auto clutch company specializing in research and development, production and sales of light, medium and heavy trucks in China. Our products are suitable for European, Japanese, Russian, American and Chinese trucks.